Falcon 1 (F1)

A bit of a pig to install on my bike, but not so with others. Picture quality is really good. Attached to my fairing and relatively shake-free on a Guzzi V-twin too.
Phone and pc software is good with so many options and settings. Only minor criticism is that the sd card is located behind a lift off cover, retained by two tiny screws so care must be taken not to lose them. Finally, I had to contact Vantrue for some technical support and they (shout out to Roxanne) we’re absolutely brilliant. I nearly bought the Innovv but so glad I didn’t, particularly after speaking to some K5/K7 owners. Recommend the F1 100%.

Facile à installer et fonctionne très bien, je recommande vivement

Completed the installation of the VANTRUE F1 Motorcycle Camera.

The camera has a solid build quality, and the software is easy to navigate. Road test pending.

Typically, I find connecting wires to be too short, but that’s not an issue here. There's more than enough cable length—sufficient for two motorcycles.

Before installing the camera on the bike, I tested it on the bench and realized it needed a firmware update. The OTA update failed and caused a reboot loop. However, I resolved the issue by formatting the SD card and installing the update from it, which worked successfully.

Be prepared for a time-consuming installation if you intend to conceal the cables and make proper connections.

The camera brackets are threaded - have secured them using the adhesive patch as well as a screw.

Très bon produit
Installation facile
Vidéo de qualité

Am wanting to get another one for my other bike, easy install , fantastic quality